This machine is counter-current horizontal spiral unloading and settling centrifuge. The main machine is composed of cylinder-cone drum, spiral unloading device, differential system, bearing seat, frame, cover shell, main and auxiliary motor and electrical system. Its working principle is: the suspension after the feed pipe and spiral discharging mouth into the drum, under the effects of the centrifugal force at high speed, high proportion of solid phased particles deposited on the inner wall of the drum, the drum for relative motion of the helical blade will continuously of solid phased particles deposited on the drum wall scraping and slag discharge mouth, after the separation of the liquid through the liquid layer adjustment plate drum opening outflow. The relative motion between the screw and the drum, that is, the differential speed is realized by the differential, and its size is controlled by the auxiliary motor. The casing of the differential is connected with the drum, the output shaft is connected with the helix, and the input shaft is connected with the auxiliary motor. The main motor drives the rotation of the drum and also drives the rotation of the differential shell, and the auxiliary motor controls the speed of the input shaft of the differential through the coupling. The differential can transfer the torque to the screw according to a certain speed ratio, so as to realize the continuous separation process of material centrifuge. |