45KW VSD Variable Speed Drive 3 phase 380V water pump controller
EM15 series frequency inverter drives apply V/F vector control and various protections to control asynchronous motors,adopting international advanced vector control algorithm with excellent features. The air duct, hardware and software have been greatly improved for better environment adaptability
Products Feature
1.Perfect voltage and current control, reducing the fault protection times
2.0.75kW~500kW(Three Phase 400V)
3.Load disturbance compensation ensures failure-free operation of motor.
4. Auto-searching motor speed at restart smoothes thestart of motor without current over-shoot.
Technical Specifications
Rapid Current Limit | To avoid frequently over current faults of the frequency inverter. |
Torque Limit and Control | It can limit the torque automatically and prevent frequently over current tripping during the running process. Torque control can be implemented in the VC mode. |
High Performance | Control of asynchronous motor and synchronous motor are implemented through the high-performance current vector control technology. |
Virtual I/O | Five groups of virtual DI/DO can realize simple logic control. |
Timing Control | Time range: 0.0~6500.0 minutes |
Motor Overheat Protection | The optional I/O extension card enables AI3 to receive the motor temperature sensor input (PT100, PT1000) so as to realize motor overheat protection. |
Multiple Encoder Types | It supports differential encoder, open-collector encoder |
Protection Mode | Motor short-circuit detection at power-on, input/output phase loss protection, over current and overvoltage protection, less voltage protection, overheat protection and overload protection,etc |
Running Command Giving | key panel; Control terminals; Serial communication port; You can switch between these giving in various ways. |
Frequency Giving | There are 10 kinds frequency giving: digital setting, analog voltage setting, analog current setting, pulse setting and serial communication port setting. |
Programmable Digital Input | 6 digital input (DI) terminals, one of which supports up to 100 kHz high-speed pulse input |
Programmable Analog Input | 3 analog input (AI) terminals, AI1,AI2 support 0V~10 V or 0mA~20mA input, AI3 support -10V~+10V |
Installation Location | Indoor, no direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapour, drip or salt. |
Altitude | Lower than 1000m |
Ambient Temperature | -10°C~ +40°C (de-rated if the ambient temperature is between 40°C and 50°C) |
Humidity | Less than 95%RH, without condensing |
Vibration | Less than 5.9 m/s2 (0.6 g) |
Storage Temperature | -20°C ~ +60°C |
Model | Power Capacity (KVA) | Input Current | Output Current | Adaptable Motor | |
---|---|---|---|---|---|
KW | HP | ||||
Three phase 380V 50/60Hz | |||||
EM15-G3-d75/P3-1d5 | 1.5/3 | 5/5.8 | 2.1/3.8 | 0.75/1.5 | 1/2 |
EM15-G3-1d5/P3-2d2 | 3/4 | 5.8/10.5 | 3.8/5.1 | 1.5/2.2 | 2/3 |
EM15-G3-2d2/P3-004 | 4/5.9 | 10.5/14.6 | 5.1/9 | 2.2/3.7 | 3/5 |
EM15-G3-004/P3-5d5 | 5.9/8.9 | 14.6/20.5 | 9/13 | 3.7/5.5 | 5/7.5 |
EM15-G3-5d5/P3-7d5 | 8.9/11 | 20.5/26 | 13/17 | 5.5/7.5 | 7.5/10 |
EM15-G3-7d5/P3-011 | 11/17 | 26/35 | 17/25 | 7.5/11 | 10/15 |
EM15-G3-011/P3-015 | 17/21 | 35/38.5 | 25/32 | 11/15 | 15/20 |
EM15-G3-015/P3-018 | 21/24 | 38.5/46.5 | 32/37 | 15/18.5 | 20/25 |
EM15-G3-018/P3-022 | 24/30 | 46.5/62 | 37/45 | 18.5/22 | 25/30 |
EM15-G3-022/P3-030 | 30/40 | 62/76 | 45/60 | 22/30 | 30/40 |
EM15-G3-030/P3-037 | 40/57 | 76/92 | 60/75 | 30/37 | 40/50 |
EM15-G3-037/P3-045 | 57/69 | 92/113 | 75/91 | 37/45 | 50/60 |
EM15-G3-045/P3-055 | 69/85 | 113/128 | 91/112 | 45/55 | 60/75 |
EM15-G3-055/P3-075 | 85/114 | 128/157 | 112/150 | 55/75 | 75/100 |
EM15-G3-075/P3-090 | 114/134 | 157/180 | 150/176 | 75/90 | 100/125 |
EM15-G3-090/P3-110 | 134/160 | 180/214 | 176/210 | 90/110 | 125/150 |
EM15-G3-110/P3-132 | 160/192 | 214/256 | 210/253 | 110/132 | 150/200 |
EM15-G3-132/P3-160 | 192/231 | 256/307 | 253/304 | 132/160 | 200/250 |
EM15-G3-160/P3-200 | 231/250 | 307/385 | 304/377 | 160/200 | 250/280 |
EM15-G3-200/P3-220 | 250/280 | 385/430 | 377/426 | 200/220 | 280/300 |
EM15-G3-220/P3-250 | 280/355 | 430/468 | 426/465 | 220/250 | 300/370 |
EM15-G3-250/P3-280 | 355/396 | 468/525 | 465/520 | 250/280 | 370/400 |
EM15-G3-280/P3-315 | 396/445 | 525/590 | 520/585 | 280/315 | 400/420 |
EM15-G3-315/P3-355 | 445/500 | 590/665 | 585/650 | 315/355 | 420/500 |
EM15-G3-355 | 500 | 665 | 650 | 355 | 500 |
EM15-G3-400 | 560 | 785 | 725 | 400 | 530 |
EM15-G3-450 | 630 | 883 | 820 | 450 | 600 |
EM15-G3-500 | 800 | 920 | 860 | 500 | 660 |
Stone, brick and wood
Energy saving, big torque quickly move up and down.
Torque current control uniform cutting and big torque with low speed.
Start and stop quickly, built-in crafts control.
Steady speed with high accuracy and big torque, high yield of production ratio.
Fan &Water Pump/Air compressor
Support built-in Speed tracking card.
Built -in Pressure closed loop and dormancy awakening, protection function of over pressure.
Built -in extension water supply card, realized one drive for multiple pumps with clock function.
Realized thermostatic control, high Energy-saving rate.
Small volume and high efficiency, frequency inverter and air compressor be used cooperatively
Plastics processing /Extrusion processing
Standard inverter cabinet with injection molding signal card.
Energy saving cabinet built in inverter and bypass.
Built in charging function to support mode of contract saving energy.
Extrusion force is big, Avoid tripping, uniform extruding flow.
Quickly and strong force output, Multiple pumps have good synchronization performance.
High energy-saving rate, with conversion of inverter and grid power.
What can you buy from us?
Soft Starter, Frequency Inverter, Servo motor and drive.
How can we guarantee quality?
EMHEATER frequency inverter passed IEC test and has CE certificate. Each piece of VFD will have 4 testing before delivery, follow ISO 9001 standard. We offer high quality VFD.
What's the delivery term?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,FCA,CPT,DDU, etc