Vector control 670HP AC Motor Drive Controller 3phase 380V inverter
EM15 is a new-generation inverter developed independently by EMHEATER, featuring low noise, hight performance and multiple functions. It adopts the rotor field-oriented vector control strategy to realize high-accuracy, wide-range speed and torque control of the motor.
Product features
High starting torque character
150% starting torque at 0.5Hz(Open loop vector control without PG)
180% starting torque at 0Hz(Closed vector control with PG)
Perfect hardware protection function
All series of hardware has three-phase protection, such as overload or over current or short circuit of any phase of the AC motor can be protected in time.
Built-in PID | It realizes closed loop control system easily. |
Auto voltage regulation (AVR) | It can keep constant output voltage automatically when the mains voltage fluctuation |
Overvoltage/ Overcurrent Stall Control | The current and voltage are limited automatically during the running process so as to avoid frequently tripping due to overvoltage / over current. |
Rapid Current Limit | To avoid frequently over current faults of the frequency inverter. |
Torque Limit and Control | It can limit the torque automatically and prevent frequently over current tripping during the running process. Torque control can be implemented in the VC mode. |
High Performance | Control of asynchronous motor and synchronous motor are implemented through the high-performance current vector control technology. |
Virtual I/O | Five groups of virtual DI/DO can realize simple logic control. |
Timing Control | Time range: 0.0~6500.0 minutes |
Motor Overheat Protection | The optional I/O extension card enables AI3 to receive the motor temperature sensor input (PT100, PT1000) so as to realize motor overheat protection. |
Frequency Giving | There are 10 kinds frequency giving: digital setting, analog voltage setting, analog current setting, pulse setting and serial communication port setting. |
Programmable Digital Input | 6 digital input (DI) terminals, one of which supports up to 100 kHz high-speed pulse input |
Programmable Analog Input | 3 analog input (AI) terminals, AI1,AI2 support 0V~10 V or 0mA~20mA input, AI3 support -10V~+10V |
Programmable Open Collector Output | 1 FMP output terminal, that supports 0–100 kHz square wave signal output (Can be used as DO output) |
Programmable Analog Output | 2 analog output (AO) terminals, both of them supports 0mA~20mA current output and 0V~10V voltage output. |
Relay Output | 2 relay output terminal (2.2KW and below only have 1 relay output terminal) |
Installation Location | Indoor, no direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapour, drip or salt. |
Altitude | Lower than 1000m |
Ambient Temperature | -10°C~ +40°C (de-rated if the ambient temperature is between 40°C and 50°C) |
Model
Model | Power Capacity (KVA) | Input Current | Output Current | Adaptable Motor | |
---|---|---|---|---|---|
KW | HP | ||||
Three phase 380V 50/60Hz | |||||
EM15-G3-d75/P3-1d5 | 1.5/3 | 5/5.8 | 2.1/3.8 | 0.75/1.5 | 1/2 |
EM15-G3-1d5/P3-2d2 | 3/4 | 5.8/10.5 | 3.8/5.1 | 1.5/2.2 | 2/3 |
EM15-G3-2d2/P3-004 | 4/5.9 | 10.5/14.6 | 5.1/9 | 2.2/3.7 | 3/5 |
EM15-G3-004/P3-5d5 | 5.9/8.9 | 14.6/20.5 | 9/13 | 3.7/5.5 | 5/7.5 |
EM15-G3-5d5/P3-7d5 | 8.9/11 | 20.5/26 | 13/17 | 5.5/7.5 | 7.5/10 |
EM15-G3-7d5/P3-011 | 11/17 | 26/35 | 17/25 | 7.5/11 | 10/15 |
EM15-G3-011/P3-015 | 17/21 | 35/38.5 | 25/32 | 11/15 | 15/20 |
EM15-G3-015/P3-018 | 21/24 | 38.5/46.5 | 32/37 | 15/18.5 | 20/25 |
EM15-G3-018/P3-022 | 24/30 | 46.5/62 | 37/45 | 18.5/22 | 25/30 |
EM15-G3-022/P3-030 | 30/40 | 62/76 | 45/60 | 22/30 | 30/40 |
EM15-G3-030/P3-037 | 40/57 | 76/92 | 60/75 | 30/37 | 40/50 |
EM15-G3-037/P3-045 | 57/69 | 92/113 | 75/91 | 37/45 | 50/60 |
EM15-G3-045/P3-055 | 69/85 | 113/128 | 91/112 | 45/55 | 60/75 |
EM15-G3-055/P3-075 | 85/114 | 128/157 | 112/150 | 55/75 | 75/100 |
EM15-G3-075/P3-090 | 114/134 | 157/180 | 150/176 | 75/90 | 100/125 |
EM15-G3-090/P3-110 | 134/160 | 180/214 | 176/210 | 90/110 | 125/150 |
EM15-G3-110/P3-132 | 160/192 | 214/256 | 210/253 | 110/132 | 150/200 |
EM15-G3-132/P3-160 | 192/231 | 256/307 | 253/304 | 132/160 | 200/250 |
EM15-G3-160/P3-200 | 231/250 | 307/385 | 304/377 | 160/200 | 250/280 |
EM15-G3-200/P3-220 | 250/280 | 385/430 | 377/426 | 200/220 | 280/300 |
EM15-G3-220/P3-250 | 280/355 | 430/468 | 426/465 | 220/250 | 300/370 |
EM15-G3-250/P3-280 | 355/396 | 468/525 | 465/520 | 250/280 | 370/400 |
EM15-G3-280/P3-315 | 396/445 | 525/590 | 520/585 | 280/315 | 400/420 |
EM15-G3-315/P3-355 | 445/500 | 590/665 | 585/650 | 315/355 | 420/500 |
EM15-G3-355 | 500 | 665 | 650 | 355 | 500 |
EM15-G3-400 | 560 | 785 | 725 | 400 | 530 |
EM15-G3-450 | 630 | 883 | 820 | 450 | 600 |
EM15-G3-500 | 800 | 920 | 860 | 500 | 660 |
Application
Textile industry
high starting torque, adapt to wide voltage fluctuation.
Airtight structure can avoid air duct blocked, Wobble function.
built in working records and techniques' curve.
Built-in closed loop, realized high precision synchronous.
Fixed-length function.
Realized permanent magnet synchronous motor open loop control.
Plastics processing /Extrusion processing
Standard inverter cabinet with injection molding signal card.
Energy saving cabinet built in inverter and bypass.
Built in charging function to support mode of contract saving energy.
Extrusion force is big, Avoid tripping, uniform extruding flow.
Quickly and strong force output, Multiple pumps have good synchronization performance.
High energy-saving rate, with conversion of inverter and grid power.
FAQ
What can you buy from us?
Soft Starter, Frequency Inverter, Servo motor and drive
What's about your delivery time?
All type we have stock,after we receive payment,we will send you within two days.
What is your production capacity?
Each product has different production capacity, we can talk details by email.