Quality 200HP Motor Frequency Inverter AC 380V built in PLC for water pump
EM15 sereis is a new-generation inverter developed independently by EMHEATER, featuring low noise, high performance and multiple functions. It adopts the rotor field-oriented vector control strategy to realize high-accuracy, wide-range speed and torque control of the motor with high reliability, powerful functions.It can be widely applied in metallurgy, petroleum, chemical engineering, spinning,
Products Feature
Support various motor's control mode
Support V/F control, Sensor-less vector control and Closed-loop vector control.
Support several of encoder.
Support Various keyboard display
The screen of the EM15 series inverter is a two-line display, which can display more than 30 states such as frequency and current etc.
High starting torque character
150% starting torque at 0.5Hz(Open loop vector control without PG)
180% starting torque at 0Hz(Closed vector control with PG)
Perfect hardware protection function
All series of hardware has three-phase protection, such as overload or over current or short circuit of any phase of the AC motor can be protected in time.
Fast current limit function
Fast current limit function prevents the inverter frequently over current alarm. When the current exceeds the protection points, fast current limit function can quickly limit current below protection point to protect the safety of equipment, and to avoid over-current alarm caused by suddenly adding load or interference.
Accurate parameters auto tuning and better motor drive
Simple water supply function
Support G/P dual rating
With CE requirements certified
Technical Specifications
Input Voltage | 220V/380V/480V±15% |
Input Frequency | 47~63Hz |
Input Frequency Resolution | 0.01Hz (Digital setting); maximum frequency×0.025% (Analog setting) |
Output Voltage | 0~Rated input voltage |
Output Frequency | 0~320Hz(SFC); 0~3200Hz (V/F) |
Control Mode | Sensor-less vector control(SVC); Closed-loop vector control (FVC); Voltage/Frequency (V/F) control |
Carrier Frequency | 0.5kHz~16kHz |
Startup Torque | G type: 0.5Hz/150% (FVC); 0Hz/180%(FVC); P type: 0.5Hz/100% |
Speed Range | 1:100(SVC);1:1000(FVC) |
Speed Stability Accuracy | ±0.5%(SVC);±0.02%(FVC) |
Torque Control Accuracy | ±5%(FVC) |
Overload Capacity | G type:150% rated current 60s; 180% rated current 3s; P type: 120% rated current 60s;150% rated current 3s. |
Torque Boost | Auto boost; Manual boost 0.1%~30.0% |
DC braking | 0.00Hz~maximum frequency (DC braking frequency); 0.0s~36.0s(Braking time); 0.0%~100.0%( Braking trigger current value) |
Built-in Simple PLC / Multiple Speeds | It realizes up to 16 speeds via the simple PLC function or combination of DI terminal states. |
Virtual I/O | Five groups of virtual DI/DO can realize simple logic control. |
Timing Control | Time range: 0.0~6500.0 minutes |
Motor Overheat Protection | The optional I/O extension card enables AI3 to receive the motor temperature sensor input (PT100, PT1000) so as to realize motor overheat protection. |
Model | Power Capacity (KVA) | Input Current (A) | Output Current (A) | Adaptable Motor | |
---|---|---|---|---|---|
KW | HP | ||||
Three phase 380V 50/60Hz | |||||
EM15-G3-d75/P3-1d5 | 1.5/3 | 5/5.8 | 2.1/3.8 | 0.75/1.5 | 1/2 |
EM15-G3-1d5/P3-2d2 | 3/4 | 5.8/10.5 | 3.8/5.1 | 1.5/2.2 | 2/3 |
EM15-G3-2d2/P3-004 | 4/5.9 | 10.5/14.6 | 5.1/9 | 2.2/3.7 | 3/5 |
EM15-G3-004/P3-5d5 | 5.9/8.9 | 14.6/20.5 | 9/13 | 3.7/5.5 | 5/7.5 |
EM15-G3-5d5/P3-7d5 | 8.9/11 | 20.5/26 | 13/17 | 5.5/7.5 | 7.5/10 |
EM15-G3-7d5/P3-011 | 11/17 | 26/35 | 17/25 | 7.5/11 | 10/15 |
EM15-G3-011/P3-015 | 17/21 | 35/38.5 | 25/32 | 11/15 | 15/20 |
EM15-G3-015/P3-018 | 21/24 | 38.5/46.5 | 32/37 | 15/18.5 | 20/25 |
EM15-G3-018/P3-022 | 24/30 | 46.5/62 | 37/45 | 18.5/22 | 25/30 |
EM15-G3-022/P3-030 | 30/40 | 62/76 | 45/60 | 22/30 | 30/40 |
EM15-G3-030/P3-037 | 40/57 | 76/92 | 60/75 | 30/37 | 40/50 |
EM15-G3-037/P3-045 | 57/69 | 92/113 | 75/91 | 37/45 | 50/60 |
EM15-G3-045/P3-055 | 69/85 | 113/128 | 91/112 | 45/55 | 60/75 |
EM15-G3-055/P3-075 | 85/114 | 128/157 | 112/150 | 55/75 | 75/100 |
EM15-G3-075/P3-090 | 114/134 | 157/180 | 150/176 | 75/90 | 100/125 |
EM15-G3-090/P3-110 | 134/160 | 180/214 | 176/210 | 90/110 | 125/150 |
EM15-G3-110/P3-132 | 160/192 | 214/256 | 210/253 | 110/132 | 150/200 |
EM15-G3-132/P3-160 | 192/231 | 256/307 | 253/304 | 132/160 | 200/250 |
EM15-G3-160/P3-200 | 231/250 | 307/385 | 304/377 | 160/200 | 250/280 |
EM15-G3-200/P3-220 | 250/280 | 385/430 | 377/426 | 200/220 | 280/300 |
EM15-G3-220/P3-250 | 280/355 | 430/468 | 426/465 | 220/250 | 300/370 |
EM15-G3-250/P3-280 | 355/396 | 468/525 | 465/520 | 250/280 | 370/400 |
EM15-G3-280/P3-315 | 396/445 | 525/590 | 520/585 | 280/315 | 400/420 |
EM15-G3-315/P3-355 | 445/500 | 590/665 | 585/650 | 315/355 | 420/500 |
EM15-G3-355 | 500 | 665 | 650 | 355 | 500 |
EM15-G3-400 | 560 | 785 | 725 | 400 | 530 |
EM15-G3-450 | 630 | 883 | 820 | 450 | 600 |
EM15-G3-500 | 800 | 920 | 860 | 500 | 660 |
Stone, brick and wood
Energy saving, big torque quickly move up and down.
Torque current control uniform cutting and big torque with low speed.
Start and stop quickly, built-in crafts control.
Steady speed with high accuracy and big torque, high yield of production ratio.
Fan &Water Pump/Air compressor
Support built-in Speed tracking card.
Built -in Pressure closed loop and dormancy awakening, protection function of over pressure.
Built -in extension water supply card, realized one drive for multiple pumps with clock function.
Realized thermostatic control, high Energy-saving rate.
Small volume and high efficiency, frequency inverter and air compressor be used cooperatively
Plastics processing /Extrusion processing
Standard inverter cabinet with injection molding signal card.
Energy saving cabinet built in inverter and bypass.
Built in charging function to support mode of contract saving energy.
Extrusion force is big, Avoid tripping, uniform extruding flow.
Quickly and strong force output, Multiple pumps have good synchronization performance.
High energy-saving rate, with conversion of inverter and grid power.
Lifting equipment
Stable and reliable operation, with mechanical brake to realize halfway stop and start.
Compatible with YASKAWA independent protocol.
Wide operating voltage, low-voltage power shake can work continuously, strong environmental adaptability.
Multi-speed synchronous transmission performance is good; low-speed with large torque has heavy load capacity.
Large lifting torque, energy-saving.
What can you buy from us?
Soft Starter, Frequency Inverter, Servo motor and drive.
How can we guarantee quality?
EMHEATER frequency inverter passed IEC test and has CE certificate. Each piece of VFD will have 4 testing before delivery, follow ISO 9001 standard. We offer high quality VFD.
What's the delivery term?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,FCA,CPT,DDU, etc