25HP 3 Phase Synchronous motor drive 415V 400Hz for Spindle motor
EM15-T is a new generation of high performance vector synchronous motor drive developed by our company. This series has excellent vector control performance, powerful overload ability and good dynamic characteristics. It realizes the speed and torque control of three-phase AC synchronous motor and meets the application requirements of different automatic production equipment.
Product features
RS485 interface as standard, support Modbus protocol in RTU mode.
Intelligent parameter setting, internal preset several sets of common parameters, reduce user parameter setting workload.
Built-in various functional modules to effectively reduce external system costs.
With perfect inertia and torque compensation function, open loop tension control adaptability is stronger .
Input Voltage | 220V/380V/480V±15% |
Input Frequency | 47~63Hz |
Input Frequency Resolution | 0.01Hz (Digital setting); maximum frequency×0.025% (Analog setting) |
Output Voltage | 0~Rated input voltage |
Output Frequency | 0~320Hz(SFC); 0~3200Hz (V/F) |
Control Mode | Sensor-less vector control(SVC); Closed-loop vector control (FVC); Voltage/Frequency (V/F) control |
Carrier Frequency | 0.5kHz~16kHz |
Startup Torque | G type: 0.5Hz/150% (FVC); 0Hz/180%(FVC); P type: 0.5Hz/100% |
Speed Range | 1:100(SVC);1:1000(FVC) |
Programmable Open Collector Output | 1 FMP output terminal, that supports 0–100 kHz square wave signal output (Can be used as DO output) |
Programmable Analog Output | 2 analog output (AO) terminals, both of them supports 0mA~20mA current output and 0V~10V voltage output. |
Relay Output | 2 relay output terminal (2.2KW and below only have 1 relay output terminal) |
Installation Location | Indoor, no direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapour, drip or salt. |
Altitude | Lower than 1000m |
Ambient Temperature | -10°C~ +40°C (de-rated if the ambient temperature is between 40°C and 50°C) |
Humidity | Less than 95%RH, without condensing |
Vibration | Less than 5.9 m/s2 (0.6 g) |
Storage Temperature | -20°C ~ +60°C |
Model
Model | EM15-T3 | ||||||||||||||||||||||||
004 | 5d5 | 7d5 | 011 | 015 | 018 | 022 | 030 | 037 | 045 | 055 | 075 | 090 | 110 | 132 | 160 | 200 | 220 | 250 | 280 | 315 | 355 | 400 | 450 | ||
Input | Voltage/Freq. | 3PH 380V;50Hz/60Hz | |||||||||||||||||||||||
Current(A) | 14.6 | 20.5 | 26 | 35 | 38.5 | 46.5 | 62 | 76 | 92 | 113 | 128 | 157 | 180 | 214 | 256 | 307 | 385 | 430 | 468 | 525 | 590 | 665 | 785 | 883 | |
Voltage range | Allowable voltage fluctuation range:±15% | ||||||||||||||||||||||||
Output | Voltage | 3PH 0V~rated voltage | |||||||||||||||||||||||
Current(A) | 9 | 13 | 17 | 25 | 32 | 37 | 45 | 60 | 75 | 91 | 112 | 150 | 176 | 210 | 253 | 304 | 377 | 426 | 465 | 520 | 585 | 650 | 725 | 820 | |
Overload | 150% rated current 60s, 180% rated current 3s | ||||||||||||||||||||||||
Adapted motor(KW) | 4 | 5.5 | 7.5 | 11 | 15 | 18.5 | 22 | 30 | 37 | 45 | 55 | 75 | 90 | 110 | 132 | 160 | 200 | 220 | 250 | 280 | 315 | 355 | 400 | 450 | |
Brake Unit | Built-in as standard | External | |||||||||||||||||||||||
Output frequency | 0~3000Hz | ||||||||||||||||||||||||
Cooling | Fan cooling | ||||||||||||||||||||||||
Altitude | Lower than 1000m | ||||||||||||||||||||||||
Ambient temperature | -10℃~+40℃40(ambient temperation at 40℃~50℃,please keep derated use) | ||||||||||||||||||||||||
Storage temperature | -20℃~+60℃ | ||||||||||||||||||||||||
Humidity | Less than 95%RH, without condensing | ||||||||||||||||||||||||
Vibration | Less than 5.9 m/s2 (0.6 g) | ||||||||||||||||||||||||
Protection level | IP20 |
Application
Lifting equipment
Stable and reliable operation, with mechanical brake to realize halfway stop and start.
Compatible with YASKAWA independent protocol.
Wide operating voltage, low-voltage power shake can work continuously, strong environmental adaptability.
Multi-speed synchronous transmission performance is good; low-speed with large torque has heavy load capacity.
Large lifting torque, energy-saving.
Plastics processing /Extrusion processing
Standard inverter cabinet with injection molding signal card.
Energy saving cabinet built in inverter and bypass.
Built in charging function to support mode of contract saving energy.
Extrusion force is big, Avoid tripping, uniform extruding flow.
Quickly and strong force output, Multiple pumps have good synchronization performance.
High energy-saving rate, with conversion of inverter and grid power.
FAQ
What is your production capacity?
Each product has different production capacity, we can talk details by email.
Who are we?
We are based in Guangdong, China, start from 2017,sell to Domestic Market(50.00%),Southeast Asia(12.00%),Eastern Europe(12.00%),South America(5.00%),Eastern Asia(3.00%),Northern Europe(3.00%),Oceania(3.00%),Southern Europe(3.00%),North America(2.00%),Western Europe(2.00%),Mid East(2.00%),Africa(1.00%),South Asia(1.00%),Central America(1.00%). There are total about 51-100 people in our office.
How can we guarantee quality?
EMHEATER frequency inverter passed IEC test and has CE certificate. Each piece of VFD will have 4 testing before delivery, follow ISO 9001 standard. We offer high quality VFD.
What's about your delivery time?
All type we have stock,after we receive payment,we will send you within two days.