XCMG motor grader GR1803 for sale in Algeria
Features
1 Hydraulic transmission controlled by electricity
2 Working equipment controlled multi valve, short operating bar, adjustable operating table, instrument
3 No-spin(differential), planetary speed-reduction transmission system
4 Hydraulic brake system
5 Hydraulic steering system
6 Cabin equipped structure can make the biade tilt by 900 tum round by 3600
7 Air-conditioner
Specification
Item | | Parameters | Unit |
General Data | Engine model | SC9DK200.1G3 | - |
Rated power | 147/2000 | (kw/rpm) | |
Dimension (standard) | 8900×2625×3420 | (mm) | |
Weight (standard) | 15400 | (kg) | |
Performance Data | Front speed | 5,8,11,19,23,38 | (km/h) |
Reverse Speed | 5,11,23 | (km/h) | |
Break force f=0.75 | 80 | (kN) | |
max grade ability | 0.2 | % | |
mini turning radius | 7.3 | (m) | |
blade lenght&height | 3965×610 | (mm) |
Basic specification | |
Engine model | SC9DK200.1G3 |
Rated power/speed | 147kW/2300rpm |
Dimension(LxWxH) | 8900×2625×3470mm |
Operating weight(Standard) | 15400kg |
Performance specification | |
Travelling speed ,forward | 5,8,11,19,23,38 km/h |
Travelling speed ,reverse | 5,11,23 km/h |
Tractive force(f=0.75) | 79KN |
Max. gradeability | 20% |
Tire inflation pressure | 260 kPa |
Working hydraulic pressure | 16 MPa |
Transmission pressure | 1.3~1.8MPa |
Operating specification | |
Max. steering angle of front wheels | ±50° |
Max. lean angle of front wheels | ±17° |
Max. oscillation angle of front axle | ±15° |
Max. oscillation angle of balance box | 15 |
Frame articulation angle | ±27° |
Min. turning radius using articulation | 7.3m |
Blade | |
Maximum lift above ground | 450mm |
Maximum depth of cutting | 500mm |
Maximum blade position angle | 90° |
Blade cutting angle | 28°—70° |
Circle reversing rotation | 360° |
Moldboard width X height | 3965×610mm |
Below picture for you reference