Anemia Reageats Ferritin Reagents for Automatic Immunoassay Analyzer in Human Serum Samples
Ferritin high and low calibrators: there are two different concentrations of high and low, 40ng/mL and 400ng/mL, respectively, with different amounts of ferritin (FERRITIN) antigen (derived from human cell culture) added. 5% bovine serum albumin (BSA) in Tris buffer (0.15M, pH 7.5).
Ferritin control 1, quality control 2: There are two different concentrations of high and low, 40ng/mL and 400ng/mL, respectively, with different amounts of ferritin (FERRITIN) antigen (derived from human cell culture) added respectively. Tris buffer (0.15M, pH 7.5) containing 5% bovine serum albumin (BSA).
Ferritin anti-reagent: Fluorescein isothiocyanate (FITC)-labeled mouse monoclonal anti-FERRITIN antibody (derived from mouse hybridoma cells) 2 µg/mL, alkaline phosphatase (AP)-labeled mouse monoclonal antibody FERRITIN antibody (derived from mouse hybridoma cells) 4µg/mL in Tris buffer (0.15M, pH7.5) containing 5% bovine serum albumin (BSA).
Ferritin buffer: Tris buffer (0.15M, pH 7.5) containing 0.5% sodium chloride (NaCl) and 5% bovine serum albumin (BSA).
Magnetic particle reagent: Magnetic particle and goat anti-FITC polyclonal antibody (derived from sheep antiserum) conjugated at 1.0 mg/mL, Tris buffer (0.1 M, PH8.0) containing 5% BSA and 0.2% Proclin300.
Instructions and attached pages: including the range of the quality control product, the uncertainty of the calibrator and the master curve card (I project information, II master curve (calibration point concentration and corresponding point luminescence value)).
Note: The components in the kits of different batches are not interchangeable.
Test item | FERRITIN |
Specification | 100 Test/Box for CIA series |
Component | Magnetic Beads |
Calibrator Low | |
Calibrator High | |
FERRITIN Anti | |
Control 1 | |
Control 2 | |
Accessories Required But Not Provided | Substrate |
Washing solution | |
Sample material | Serum |
Sample volume | More than 200μL |
Storage | 2-8℃ |
Product picture