Ratio 1000:1 Finest Inductive Current Clamp Clip On CTs Online for Measurement

The GFUVE Clip On CTs Q8-3 clamps around the current carrying conductor to perform noncontact current measurements while without interrupting the circuit under test.

The Q8-3 Clip On CT is suitable for 5A, 10A cable online measurement, the user-friendly shape make It easily clamp onto cables.

Features

Suitable for 5A, 10A cable online measurement.

Holding wire diameter: φ8mm

Dimension: 42.6mm × 122.5mm × 23mm

Load capacity: ≤4Ω

Installation: clamp type

Output mode: lead output

Applications

Electric energy meter calibrator (on site)

Double clamp type ground resistance tester

Double clamp type phase volt-ampere meter

Digital multi-meter

Multi-function energy meter

Power quality analyzer

Matched instruments

Calibration instrument on site

Parameter

FAQ, following questions will help you to select the matched probe for your applications.

1. Please determine if you are measuring AC or DC?

GFUVE Q8-3 is for AC measurement. If DC, we have hall effect models to suggest.

2. What is the maximum current you will measure?

Q8-3 max current is 12A

3. What size conductor will you clamp onto? This parameter determines the probe jaw size needed.

Q8-3 can clamp conductor with diameter within 8mm

4. What type of probe output do you need or can you work with (mA, mV, A, AC, etc.)?

Q8-3 can customize output with mA

5. What is the working voltage of the conductor to be measured?

GFUVE probes should be used below 600 volts

6. What type of termination do you need: jacks, leads or BNC?

Q8-3 standard has 2.5meter leads. We can offer jacks or BNC… as options.

7. If you cannot find information you need or would like assistance, contact us today. We have designed many more probes than those shown in this catalog, and we manufacture in Beijing, China.

Photos