Q13 AC Split Core Current Clamp Sensor With Analog Output 2000:1 Ratio

The GFUVE Current Clamp Sensor Q13-2 is precise external AC measurement tool to work with DMMs, data loggers, power meters, power quality analyzer. It can measure low currents 100A primary, and output current on 100mA secondary. Clamp sensor Q13-2 enables the user of a clamp meter to measure the current without having to cut off the plug and separate the conductors.

Clamp-on CT's & Flexible AC Current Probe; Split Core CT's ( AAC to AAC ) / (AAC to AAC) Flexible Current Transformer (FCT Series) Clamp-On Current Transformer (CCT Series) High Precision CT's; Clamp - On AC Transformer.

GFUVE Q13 Series of Clamp-On Current Transformer's are designed for fast and easy installation. Clamp-On CT uses Permalloy Magnetic Core or Silicon Amorphous Core, with characteristics of small size. high precision, good stability and strong anti-interference ability.

The Amprobe Q13 current clamp probe measures AC or DC current without touching or interrupting the circuit. The clamp has two jaws that fit around a 0.8" (13 mm) conductor to convert a high-current signal to a low-level millivolt signal so it can be read by a testing device.

Features

Measurement range of 1mA to 120A AC

Improved ergonomic design and easy operation

High content nickel metal core

Low phase shift for power measurement

Small, compact size

Jaw opening accommodates conductors up to 13mm diameter

Designed for DMMs, loggers, recorders and oscilloscopes

40Hz to 10kHz response

1mA/A AC output signals

Designed to EN 61010, 600V CAT III safety standard

UL, CE mark

Applications

Power quality measuring

Measuring around cable bundles

Power load monitoring

Waveform analysis

Energy meter calibrator

Measuring in breaker panels

HVAC

Residential and commercial sites

Data logging/recording

Parameter

PHOTO

FAQ, following questions will help you to select the matched probe for your applications.

1. Please determine if you are measuring AC or DC?

GFUVE current clamp sensor Q13-2 is for AC measurement.

2. What is the maximum current you will measure?

Q13-2 maximum current is 120A.

3. What size conductor will you clamp onto? This parameter determines the probe jaw size needed.

Q13-2 can clamp conductor is φ13mm

4. What type of probe output do you need or can you work with (mA, mV, A, AC, etc.)?

Q13-2 current sensor can customize output with mA.

5. What is the working voltage of the conductor to be measured?

GFUVE current clamp should be used below 600 volts

6. What type of termination do you need: jacks, leads or BNC?

Current clamp sensor Q13-2 standard has 2.5 meters leads. We can offer jacks or BNC… as options.

7. If you cannot find information you need or would like assistance, contact us today. We have designed many more probes than those shown in this catalog, and we manufacture in Beijing, China.