T-203H From 0.8 to 10000 Handheld MINI Three Phase transformer turns ratio test set
DESP
T-203H Handheld MINI Three Phase transformer turns ratio test set adopts three-phase power supply output voltage, the test speed Instrument to adopt advanced technology for A/D, wide range range; High speed ARM as the core digital processor, test quickly; English menu display, Elaborate and handheld design, makes the T-203H TTR tester superior and powerful with small size and light weight. The TTR tester uses a programmable signal source technology. It is especially suitable for special transformers such as Z-type transformers, rectifier transformers, Scott or anti-Scott transformers, etc. The T-203H TTR tester adopts the new algorithm developed by our company to measure the ratio of three-phase transformer and ensure the measurement accuracy without adjusting the balance of the three-phase power supply. Therefore, the transformer turns ratio and wiring method can be measured in one minute.
The turns ratio test is performed on all taps of every winding. The Transformer Turns Ratio tester (TTR) is device used to measure the turns ratio between the windings (example shown below). Voltage is applied on the H marked leads and measured of the X marked lead by the test set.
The GFUVE T-203H is an automatic, hand-held, battery operated transformer turns ratio test set. It is used to measure the turns ratio, excitation current and polarity of windings in single- and three-phase distribution and power transformers (tested phase by phase), potential and current transformers, and tapped transformers.
Electrical parameters | ||
---|---|---|
Power supply | 7.2V Lithium-ion rechargeable battery | |
Data storage | 500 group | |
TTR measurement accuracy | Range1 | 0.8-3000:0.1%±2words |
Range2 | 3000-10000:0.2%±2words | |
Display precision | 5 Bits, resolution ratio: 0.0001 | |
Phase angle accuracy | 0.1° | |
Voltage accuracy on HV side | 0.05% | |
Voltage accuracy on LV side | 0.1% | |
LCD | 5.6″ color LCD display | |
Key | 30 pcs | |
Communication portr | RS232 , USB | |
Standard | IEC61010-1, IEC61326-1 | |
Mechanical parameters | ||
Dimension (L×W×H) (mm) | 260x160x60 | |
Weight (kg) | 3 | |
Environmental conditions | ||
Operating temperature | -10°C to 50°C | |
Storage temperature | -20°C to 70°C | |
Relative humidity | ≤85%RH |
PHOTOS
PACKAGE