High Quality Automatic Dispensing Machine for Glass Dispenser Robot Glue Dispensing Machine

Product description:

Multi-head dispensing machine has the following advantages:

1. Efficient production:

• Fast dispensing speed: multiple dispensing heads can be dispensed at the same time, compared with the single-head dispensing machine, more dispensing tasks can be completed in the same time, greatly improving production efficiency. For example, in the mass production of electronic products, the multi-head dispensing machine can quickly complete the dispensing work on multiple circuit boards to meet the needs of large-scale production.

• Strong continuous production capacity: continuous dispensing operation can reduce the downtime of equipment and the time interval for replacing products, further improving the continuity and efficiency of production. For production lines that require long-term continuous operation, the advantages of multi-head dispensing machines are particularly obvious.

2. High dispensing quality:

• Good dispensing accuracy consistency: multiple dispensing heads under the precise control of the same control system can maintain a high degree of dispensing accuracy consistency. The amount of glue, dispensing speed and dispensing position of each dispensing head can be accurately controlled, so as to ensure the quality of each dispensing point is uniform and stable, and improve the overall quality of the product.

• Reduce human error: Compared with manual dispensing or single-head dispensing machine requiring frequent manual operation, multi-head dispensing machine has a higher degree of automation, reducing the impact of human factors on dispensing quality and reducing dispensing defects caused by improper human operation.

3. Wide range of application:

• Can adapt to a variety of products: by adjusting the position, Angle and spacing of the dispensing head and other parameters, can adapt to different sizes, shapes and types of product dispensing needs. Whether it is small electronic components, large mechanical parts, or complex crafts, multi-point dispensing machines can achieve accurate dispensing operations.

• Suitable for a variety of glues: compatible with various types of glues, such as hot melt adhesive, silicone, epoxy resin adhesive, UV adhesive, etc. For the characteristics of different glues, the multi-head dispensing machine can achieve the best dispensing effect by adjusting the dispensing parameters and selecting the appropriate dispensing head.

4. Convenient and flexible operation:

• Simple programming: Equipped with advanced control system and operating software, operators can quickly adjust the working mode and dispensing parameters of multi-head dispensing machine through simple programming and parameter Settings to adapt to different production tasks. Even complex dispensing paths and graphics can be easily programmed and operated.

• Easy maintenance: The structural design of multi-head dispensing machine is usually more reasonable, and the layout of each component is compact and easy to disassemble and install. When the equipment needs to be maintained and cleaned, the operator can easily maintain each dispensing head separately, saving maintenance time and cost.

5. Cost savings:

• Labor cost reduction: Efficient dispensing capacity reduces the reliance on labor, and a multi-head dispensing machine can replace multiple single-head dispensing machines or manual dispensing operations, thereby reducing the labor cost of the enterprise. Especially in mass production, the saving effect of labor cost is more significant.

• High glue utilization rate: multi-head dispensing machine can precisely control the output of glue, avoiding the waste of glue. At the same time, because multiple dispensing heads can work at the same time, the replacement frequency and discharge time of glue are reduced, the utilization rate of glue is improved, and the production cost is reduced.

Product parameter:

Specification:

Our advantage:

1.We are factory manufacturers.

2.Reduce overall cost.
3.Improve automation level.

4.Improve informatization level.

5.Improve product yield.

6.Provide customers with the most advanced

system solutions for automation equipment.