High-Precision Motor - Building upon our motorised stages used in our slot-die coater and syringe pump, we have developed a motor with a high degree of accuracy and reproducibility. You can be sure that each time you coat your sample, you will get the same results every time.

Smooth Motion - With the micro-stepping motor, your substrate will be immersed and withdrawn using smooth and precise movements, ensuring high-quality film coatings.

Versatile Substrate Compatibility - You can dip coat substrates of various sizes, shapes, and materials

Wide Range of Speeds - Our Dip Coater can withdraw a substrate from solution at rates varying from as low as 0.01mm/s to as high as 50mm/s. This gives a wide range of coating thicknesses - all from a single dip-coating system.

Compact Size - The small footprint of the system enables you to perform measurements even in the smallest and busiest labs! With a total bench area of 20 cm x 30 cm, you can be assured that the Dip Coater will fit in your lab.

Sturdy, Non-Slip Design - With rubberised feet, the Dip Coater will remain in place where you want it to!

Simple-to-Use Software - The in-built software and controls on the Dip Coater have been designed to make it easy for you to programme an experiment. By setting the immersion speed, dwell time, withdrawal speed, and drying time, the entire dip coating process can be completed.

DCM400 Suitable for any kinds of zinc flake paints and related top coat, seal, teflon coating.

Equipment main body:
1. Weighting loading system.

2. Dip-spin coating system.

3. Conveyor distributor.

4. Operation control system.

Features:

Basket planet type configuration, every time convert direction can realize the workpiece location swap, the qualified rate of blind hole workpieces is very high, full automatic design, efficient and energy saving.

Main parameter: