Inconel 625 Rod UNS N06625 / DIN W. Nr. 2.4856 Round ,Square ,Hexagon

Inconel 625 / UNS N06625 / DIN W. Nr. 2.4856

Inconel 625 Rod, Inconel 625 Bar ,Inconel 625 Threaded Bar , Inconel 625 Triangular Bar , Inconel 625 Square Bar

Inconel 625 exhibits excellent corrosion resistance in many media. Excellent resistance to pitting, crevice corrosion, intergranular corrosion and erosion in chloride media.

Inconel 625 Rod shows excellent corrosion resistance in many media. Excellent resistance to pitting, crevice corrosion, intergranular corrosion and erosion in chloride media

• Inconel 625 Bar
• Inconel 625 Wire
• Inconel 625 Sheet
• Inconel 625 Plate
• Inconel 625 Forgings
• Inconel 625 Pipe fittings
• Inconel 625 Flanges
• Inconel 625 Seamless & Welded pipe
• Inconel 625 Seamless Tube & Welded tube
• Inconel 625 Welding wire

Inconel 625 Rod Chemical composition:

This Inconel 625 Rod has the following characteristics:
1.Excellent corrosion resistance to various corrosive media in oxidizing and reducing environment
2.Excellent resistance to pitting and crevice corrosion, and will not cause stress corrosion cracking due to chloride
3. Excellent resistance to inorganic acid corrosion, such as nitric acid, phosphoric acid, sulfuric acid, hydrochloric acid and mixed acids of sulfuric acid and hydrochloric acid, etc.
4.Excellent resistance to various inorganic acid mixed solutions
5. When the temperature reaches 40 ℃, it can show good corrosion resistance in various concentrations of hydrochloric acid solution.
6.Good processability and weldability, no cracking sensitivity after welding
7. Manufacturing certification of pressure vessels with wall temperature of -196 ～ 450 ℃
8. Certified by the American Society of Corrosion Engineers NACE standard (MR-01-75) to meet the highest standard level VII for use in acid gas environments

Inconel 625 Rod application are:
The softened and annealed low carbon alloy 625 is widely used in the chemical process industry. Its good corrosion resistance and high strength make it a thinner structural component. 625 alloy can be used in places that are exposed to seawater and subjected to high mechanical stress. Typical application areas:
1. Chlorinated organic chemical process components, especially when using acid chloride catalysts
2. digesters and bleaching tanks for the pulp and paper industry
3. Absorption tower, reheater, flue gas inlet baffle, fan (wet), agitator, deflector and flue in the flue gas desulfurization system
4. Equipment and components used in the manufacture of sour gas environments
5. Acid and acetic anhydride reaction generator
6. Sulfuric acid condenser

Inconel 625 Rod Picture: