TIG Welding Tungsten Electrodes

Tungsten electrodes
Type: WT20, pure tungsten WP, cerium tungsten WC20 , lanthanum tungsten WL10 WL15 WL20 , zirconium tungsten WZr,yttrium tungsten WY20, etc.
Size: Dia(1.0-10mm)*L L<1500mm
Product Condition: Black,Annealed,Ground and Polished
Applications: TIG welding and plasma welding,cutting,spray-coating and smelting
Product Quality Certificate: ISO9001-2000

TIG Welding Tungsten Electrodes appearance:the surface is smooth and straight, no defects (crackle,hole,trough, etc);

Tungsten electrode main applications:used in electric boosting glass kiln electrode and electric vacuum parts, etc.

Ceriated Tungsten Electrode(WCe) is a non -radioactive material. It is known to be especially good for DC welding with low amperage because it starts very easily at low AMPS and usually requires about 10% less AMPS to operate than thoriated material. It is very popular to be used for the welding of orbital tube, pipe, very small parts, short weding cycles and also where a specific number of welds are called and then the electrode is to be replaced.
TIG Welding Tungsten Electrodes Picture:

Thoriated Tungsten Electrode(WT) is the most commonly used tungsten in America and some other countries and is a good general used tungsten which has the superior welding performance Especially, it's performance well when over loaded with extra amperage. This tungsten is used primarily for DC Welding of carbon & stainless steels, nickel alloys and titanuium, etc.

LanthanumTungsten is a non-radioactive material with good welding performance. Its electric conductivity is most closed to that of 2% Thoriated Tungsten. Welders can easily replace Thoriated Tungsten Electrodes with Lanthanated without any changes of welding program. In Europe and Japan, Lathanated Tungsten has been the most popular alternative to 2% Thoriated Tungsten for most applications. This tungsten is used primarily for DC welding but will also show good results for AC welding.