High Grinding Efficiency Continuous Ball Mill Environmental Friendly

Ball Mill Grinder Introduction:

Continous ball mill is specially designed for cement, iron ore, copper ore, alumina, cement, calcium carbonate, bauxite, calcium carbide, calcium oxide, wet grinding, ceramic, refractory, slurry, coconut shell, carbon industries etc. In the continuous type ball mill, the material is being fed from the one end through its hollow shaft. The crushed material comes out from the hollow shaft at the other end. Usually continuous mills are used under the high production rate condition.

Our Advantages:
1. Maintain the uniform and continuous delivery of materials to the ball mill to ensure that the equipment is constantly feeding and not blocking;

2. The inlet and outlet can be adjusted freely, and this should be used in a timely manner to further increase the output;

3. The ball mill using steel balls as the grinding medium can appropriately increase the grinding area or increase the number of steel balls to increase the output;

4. Add grinding aids in the mill to effectively improve its production capacity;

5. It adopts high-quality motor as its core component, so it has greater production capacity and higher working efficiency, so the output can also meet user standards.

6. Due to the very reasonable structure design, its working stability is relatively strong, which is one of the reasons for its high working efficiency and high output.

7. The failure rate is almost zero. Some customers report that there is no process failure within two years of work, so it can successfully complete the task.

Working Principle:

Ball Mill is made up of feeding part, discharging part, gyre part, transmission part, (decelerator, small transmission gear, generator, electrical control) and so on. The hollow axis adopts the cast steel and the lining can replace , the rotating big gear processes in the way of casting rolling gear. The barrel body is wearable well and bears wearable scale board. This machine runs steadily and works reliably.

1. This ball mill, a horizontal type and tubular running device, has two chamber. This machine is grid type. The material enters first warehouse spirally and evenly along the input material hollow axis by input material device.

2. In this chamber, there is a ladder scaleboard or ripple scaleboard, and different specification steel balls. When shell rotates and it produces centrifugal force. At this time, steel balls will be carried to certain height and falls down to make the material heavy impact and grinded.

3. After being grinded coarsely in the first chamber, material enters second chamber for regrinding with the steel ball and scaleboard. At the end, the powder is discharged by output material board and the final products are completed.

Continuous Ball Mill ​Specifications: