· Senseless flux vector control(VC)V/F(Voltage/Frequency)control
· The overload capacity allows for 60 seconds at 150% of the rated current and 3 seconds at 180% of the rated current.
· Ten auxiliary frequency sources are available.
· It enables precise adjustment of the auxiliary frequency and frequency synthesis.
· Supports PM motor (Z2000T series)
· Optional inclusion of built-in EMC filter;
· Power range: 110V/220V/380V/415V/440V/480V, ranging from 0.4kW to 450kW.
Item | Z2000 series |
Control Mode | Sensorless flux vector control(SFVC) Voltage/Frequency (V/F) Control |
Maximum frequency | Vector control:0-320Hz V/F control:0-3200Hz |
Carrier frequency | 1kHz~16kHz The carrier frequency is automatically adjusted based on the load features. |
Input frequency resolution | Digital setting:0.01Hz Analog setting: Maximum frequency 0.025% |
Start torque | G: Type:0.5Hz/150%(SVC) P: Type:0.5Hz/100% |
Speed range | 1:100(SVC) |
Speed stability accuracy | ±0.5%(SVC) |
Overload capacity | G Type:60s for 150% of the rated current, 3s for 180% of the rated current. P Type:60s for 120% of the rated current, 3s for 150% of the rated current. |
Torque boost | Auto-boost ; Customized boost:0.1%~30.0% |
VF curve | Line V/F curve;Multi-point V/F curve;N-power V/F curve |
VF separation | 2 types: complete separation;half separation |
Ramp Mode | Straight-line ramp;S-curve ramp;Four groups of acceleration/deceleration time:0~6500.0s |
Auto voltage regulation(AVR) | It can keep constant output voltage automatically when the mains voltage changes |
Rapid current limit | It helps to avoid frequent over current faults of the AC drive. |
Torque limit and control | It can keep constant output voltage automatically when the mains voltage changes |
Onboard PID | It realizes process-controlled closed loop control system easily |
JOG control | JOG frequency range: 0.00–50.00 Hz JOG acceleration/deceleration time: 0.0–6500.0s |
DC braking | DC braking frequency:0.00Hz to maximum frequency Braking time:0.0-100.0s Braking action current value:0.0%-100.0% |
Instantaneous blackout doesn’t stop | The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time. |
Timing control | Timing range:0.0Min~6500.0Min |
Communication | RS485 / Ethecat(optional) |
Run command channel | Given by the panel,control terminals,serial communication port,can be switched by many ways |
Frequency source | 10 kinds of frequency source, given by digital analog voltage, analog current, pulse, serial port. It can be switched by many ways |
Auxiliary frequency source | 10 kinds of frequency source, can easily realize micro adjustment, frequency Synthesizer |
Input terminals | 6 digital input terminals, one of which supports up to100 kHz high-speed pulse input (optional). 2 analog input terminal, one of which only supports0-10 V voltage input and the other supports 0-10V voltage input or 4-20 mA current input. |
Output terminals | 1 digital output terminal 1 relay output terminal 1 analog output terminal: that supports 0-20 mA current output or 0-10v voltage output |
Multiple protection modes | Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under voltage protection, overheat protection and overload protection. |
Close loop vector control | No |
Built-in braking unit | Yes,below 37kw (include 37kw). Optional for more than 45KW |
VF+Vector control | Yes |
High speed pulse output | Yes |
Movable digital keypad | Yes |
AI | 2 |
AO | 1 |
DI | 6 |
DO | Standard 1,optional 2 |
Relay output | Standard 1,over 30kw optional 2 |
DC braking | Yes |
Collector | 1 |
24V power supply | Below 30kw optional,30kw and above support |
EMC filter | Optional |
0.1S acceleration/deceleration | Yes |
Simple PLC | Yes |
All kinds of protection | Support |
PID | Yes |
DC choke | 30kw—220kw optional,250kw and above all have |
DC bus +,- terminals | Yes |
STO function | No |
Communication | RS485 |
Certificate | KC+CE |
Warranty | 18 months |
Q1:What is your MOQ?
A: 1 pc
Q2:What's your terms of payment?
A:T/T 100% before delivery.
Q3:What's your delivery time?
A:Generally within 15 days after receiving full payment.
Q4:How can l get OEM/ODM order?
A:If your order quantity meets certain requirements, we are happy to customize it for you. We have cooperation with more than forty manufacturers.