ZONCN's NZ100 vfd inverter is known for its compact size, which gives it a significant advantage in situations where space is limited. The port design is not only easy to connect, but also the installation process is extremely simple, and can even support rail installation (below 5.5kW), greatly saving installation time and cost.
The NZ100 vfd inverter delivers excellent performance, providing a stable frequency and voltage output. It supports a variety of control methods such as space vector and V/F control to ensure that the motor can run smoothly under various working conditions. At the same time, the NZ100 vfd inverter also has the characteristics of strong overload capacity and good environmental adaptability, which can continue to work stably in harsh environments.
Items | NZ100 series vfd inverter |
Input rated voltage,frequency | One-phase/Three phase AC 220v/380v 50/60Hz |
Input voltage range | 170-240v(220v)330-440v(380v) |
Output voltage range | 0-220v(220v)0-380v(380v) |
Output frequency range | 0.1~400Hz |
Indication | Operating status/Alarm definition/interactive guidance: frequency setting,the output frequency/ current, DC bus voltage and so on. |
Frequency setting resolution | Digital input: 0.10Hz,analog input: 0.1% of maximum output frequency |
Output frequency accuracy | 0.01Hz |
VF control | Setting V/F curve to satisfy various load requirements |
Torque boost | Auto increase: auto raise torque by loading Condition;Manual increase:enable to set 0.0~20.0% of raising torque. |
Multifunctional input terminal | Four multi-function input terminals, realizing functions including eight sectionspeed control, program running, four-section acceleration/deceleration speedswitch, UP/DOWN function and emergency stop and other functions |
Multifunctional output terminal | 1 multi-function output terminals for displaying of run, zero speed, extermnalabnormity, program operation and other information and warnings |
Acceleration/ Deceleration time setting | 0~999.9s acceleration/deceleration time can be set individually |
PID control | Build-in PID control |
RS485 | Standard RS485 communication function(MODBUS) |
Frequency setting | Analog input: 0~ 10 V, 4~20mA Note: AVI terminals can be used to select an analog voltage input(AV) and analog current input (Al) through the switch J2. |
Multi-speed | Four multifunction input terminals, 15 section speed can be set |
Automatic voltage regulation | Automatic voltage regulation function can be selected |
Counter | Built-in 2 group of counters |
Protection | IP20 |
The compact size of the NZ100 series drives makes it easy to integrate into a variety of small machines. The port is designed on the outside, easy to connect, easy to install, and can be installed by rail (below 5.5kW), which greatly saves installation time and cost. At the same time, it also provides an RS485 communication port, which can realize remote control and data transmission, making the operation of the equipment more flexible and convenient.
In the field of food machinery, the NZ100 series inverter also performs well. With V/F control and a built-in PID controller, it enables highly accurate speed and tension control, which is essential for machines that require precise control of food processing. Whether it is a dumpling machine, a blender, a filling machine or a pastry forming machine, the NZ100 series inverter provides stable and reliable frequency conversion control to ensure the accuracy and efficiency of food processing.
Model | Rated output power (kW) | Rated input current (A) | Rated output current (A) | Motor Power (kW) |
Input voltage(v):1PH AC 220V±15% | ||||
NZ100-0R4G-2 | 0.4 | 5.4 | 2.5 | 0.4 |
NZ100-0R75G-2 | 0.75 | 8.2 | 5 | 0.75 |
NZ100-1R5G-2 | 1.5 | 14 | 7 | 1.5 |
NZ100-2R2G-2 | 2.2 | 23 | 11 | 2.2 |
Input voltage(v):3PH AC 380V±15% | ||||
NZ100-0R75G-4 | 0.75 | 3.4 | 2.7 | 0.75 |
NZ100-1R5G-4 | 1.5 | 5 | 4 | 1.5 |
NZ100-2R2G-4 | 2.2 | 5.8 | 5 | 2.2 |
NZ100-3R7G/5R5P-4 | 3.7 | 10.7 | 8.6 | 3.7 |
NZ100-5R5G/7R5P-4 | 5.5 | 14.6 | 12.5 | 5.5 |
NZ100-7R5G/11P-4 | 7.5 | 20 | 17.5 | 7.5 |
NZ100-11G/15P-4 | 11 | 26 | 24 | 11 |
NZ100-15G/18.5P-4 | 15 | 35 | 33 | 15 |
Q1:What is your MOQ?
A: 1 pc
Q2:What's your terms of payment?
A:T/T 100% before delivery.
Q3:What's your delivery time?
A:Generally within 15 days after receiving full payment.
Q4:How can l get OEM/ODM order?
A:If your order quantity meets certain requirements, we are happy to customize it for you. We have cooperation with more than forty manufacturers.