Specifications
Brand Name :
ZONCN
Model Number :
SP600T-7R5KY-4
Certification :
KC; CE
Place of Origin :
China
MOQ :
1 PC
Payment Terms :
T/T, Paypal
Supply Ability :
100,000 pcs/month
Delivery Time :
7-30 days
Packaging Details :
inside: box; outside: carton
Type :
variable speed drive
Brand :
ZONCN
Input Voltage :
380V+/-15%
Output Frequency :
0 - 320Hz
Power :
7.5kw
Application :
Screw air compressor
Motor type :
PMSM
Warranty :
18 months
Description

ZONCN SP600T 380v 10hp 15hp 7.5kw 11kw Variable Speed Drive VSD For Screw Air Compressor

SP600T Inverter Description

ZONCN focus on producing inverter from 2005. During the past 2 decades, we have researched and developed different hot-selling series, like NZ100, NZ200, Z2000, Z8000, T9000, Z5000-BF, DP500T, etc. They are widly used in various industrial application and solutions. What's more, ZONC is the Top 1 brand which used in air compress industry in China.

SP600T series is ZONCN's special VFD inverter which designed for air compressor, it is easy to install, easy to operate and wiring. It uses special software, connect with HMI(controller), internet without testing, support for one-key start.

SP600T Inverter Specification

Item Inverter Specification
Basic control functions Control mode Open loop vector control, V / F control
Maximum frequency

Open loop vector control:0~600Hz,

V / F control: 0~3200Hz

Carrier frequency 0.5kHz~15kHz , The carrier frequency is automatically adjusted based on the load features.
Input frequency resolution

Digital setting:0.01Hz

Analog setting: maximum frequency x 0.025%

Startup torque 0.5 Hz/150%
Speed range 1:100
Speed stability accuracy

± 0.2%

Torque control accuracy ±10%
Overload capacity 60s for 150% of the rated current, 3s for 180% of the rated current.
Torque boost

Fixed boost

Customized boost 0.1%–30.0%

V/F curve

Straight-line V/F curve

Multi-point V/F curve

N-power V/F curve (1.2-power, 1.4-power, 1.6-power,

1.8-power, square)

V/F separation Two types: complete separation; half separation

Ramp mode

Straight-line ramp

S-curve ramp

Four groups of acceleration/deceleration time with the range of 0.0–6500.0s

Communication methods RS485

JOG control

JOG frequency range: 0.00Hz–50.00 Hz

JOG acceleration/deceleration time: 0.0–6500.0s

Built-in PID It realizes process-controlled closed loop control system easily.
Auto voltage
regulation (AVR)
It can keep constant output voltage automatically when the mains voltage changes.
Frequency source Digital setting
Input and output interfaces Analog Input

1 pressure sensor: 4 ~ 20mA input

2 temperature sensor: PT100

Digital input

2 normal digital input

1 PTC protection circuit (compatible with normal digital inputs)

Digital Output 2 relays output normally open (built in 220VAC voltage)
LED diode display Standard 3 LED display
protection Motor overheat protection (PTC), the power-to-ground short-circuit protection, inverter over-current, overload, over voltage, under voltage, overheat, output phase loss, communication fault, current detection fault, EEPROM read-write fault and so on.
Fan

DP500: Fan inverter: 380V 15-55kW Master Motor built-in fan inverter 380V 1.5kW;

380V 75-160kW Master motor built-in fan inverter 380V 2.2kW

Environment Installation location Indoor, free from direct sunlight, dust, corrosive gas,combustible gas, oil smoke, vapor, drip or salt.
Altitude Lower than 1000 m
Ambient temperature -10°C ~+40°C (Downshift if the ambient temperature is between 40°C and 50°C)
Humidity Less than 95%RH, without condensing
Vibration Less than 5.9 m/s2 (0.6 g)
Storage temperature -20°C~60°C

Inverter picture

ZONCN SP600T 380v 10hp 15hp 7.5kw 11kw Variable Speed Drive VSD For Screw Air Compressor

ZONCN Introduction

ZONCN SP600T 380v 10hp 15hp 7.5kw 11kw Variable Speed Drive VSD For Screw Air Compressor

Wuhu ZONCN Automation Equipment Co., Ltd. is located in Wuhu city, Anhui province, which is the 4th factory of Shanghai Zhongchen Electronic Technology Co., Ltd. It is the production base of small power frequency inverters, and also the office address of international trade department. We are an industrial equipment manufacturer focusing on the R&D, production, sales and service of VFD inverter and Servo products. Our head office was established in 2005 in Shanghai, total factory area is about 100,000 m2. The 4th factory where our company set up is about 55,000 m2, which is the largest one among the 4 factories at present.

ZONCN have many hot-selling series, for example, NZ100, NZ200, Z2000, Z8000, T9000, Z5000-BF series, DP500T, etc. Our annual sales quantity is about 1 Million units last year. Our inverters are been exported to more than 50 countries. And We always welcome you to visit our factory for inverter business negotiation and cooperation.

Send your message to this supplier
Send Now

ZONCN SP600T 380v 10hp 15hp 7.5kw 11kw Variable Speed Drive VSD For Screw Air Compressor

Ask Latest Price
Brand Name :
ZONCN
Model Number :
SP600T-7R5KY-4
Certification :
KC; CE
Place of Origin :
China
MOQ :
1 PC
Payment Terms :
T/T, Paypal
Contact Supplier
ZONCN SP600T 380v 10hp 15hp 7.5kw 11kw Variable Speed Drive VSD For Screw Air Compressor
ZONCN SP600T 380v 10hp 15hp 7.5kw 11kw Variable Speed Drive VSD For Screw Air Compressor
ZONCN SP600T 380v 10hp 15hp 7.5kw 11kw Variable Speed Drive VSD For Screw Air Compressor

Wuhu ZONCN Automation Equipment Co., LTD.

Verified Supplier
2 Years
anhui, wuhu
Since 2006
Business Type :
Manufacturer, Exporter, Seller
Total Annual :
150 million-200 million
Employee Number :
600~700
Certification Level :
Verified Supplier
Contact Supplier
Submit Requirement