T9200 T9400 ZONCN T9000 Variable Frequency Drive VFD Inverter 220v 380v 3.7kw 5.5kw
ZONCN T9000 Series--- Inverters for general purposes.
T9000 inverter's control mode: VF control+open loop vector control+close loop vector control.
Communication of T9000: standard RS485, also support Profinet.
24V power supply terminal: Have
Removable panel: Yes for powers below 5.5kw.
Inverter Voltage : 220v/380V/440V/480V
Inverter power range: 0.4kw-450kw
ZONCN T9000 Inverter Model | Input Voltage (V) | Rated output power(kW) | Rated input current(A) | Rated output current(A) | Motor Power (KW) |
T9200-0R4G | 1PH AC 220V±15% | 0.4 | 5.4 | 2.5 | 0.4 |
T9200-0R75G | 0.75 | 7.2 | 5 | 0.75 | |
T9200-1R5G | 1.5 | 10 | 7 | 1.5 | |
T9200-2R2G | 2.2 | 16 | 11 | 2.2 | |
T9200-3R7G | 3.7 | 17 | 16.5 | 3.7 | |
T9200-5R5G | 5.5 | 26 | 25 | 5.5 | |
T9200-7R5G | 7.5 | 35 | 32 | 7.5 | |
T9400-0R4G | 3PH AC 380V±15% | 0.4 | 3.4 | 1.2 | 0.4 |
T9400-0R75G | 0.75 | 3.8 | 2.5 | 0.75 | |
T9400-1R5G | 1.5 | 5 | 3.7 | 1.5 | |
T9400-2R2G | 2.2 | 5.8 | 5 | 2.2 | |
T9400-3R7G/5R5P | 3.7/5.5 | 10/15 | 9/13 | 3.7/5.5 | |
T9400-5R5G/7R5P | 5.5/7.5 | 15/20 | 13/17 | 5.5/7.5 | |
T9400-7R5G/11P | 7.5/11 | 20/26 | 17/25 | 7.5/11 | |
T9400-11G/15P | 11/15 | 26/35 | 25/32 | 11/15 | |
T9400-15G/18.5P | 15/18.5 | 35/38 | 32/37 | 15/18.5 | |
T9400-18.5G/22P | 18.5/22 | 38/46 | 37/45 | 18.5/22 | |
T9400-22G/30P | 22/30 | 46/62 | 45/60 | 22/30 | |
T9400-30G/37P | 30/37 | 62/76 | 60/75 | 30/37 | |
T9400-37G/45P | 37/45 | 76/90 | 75/90 | 37/45 | |
T9400-45G/55P | 45/55 | 92/113 | 90/110 | 45/55 | |
T9400-55G | 55 | 113 | 110 | 55 | |
T9400-75G/90P | 75/90 | 157/180 | 150/176 | 75/90 | |
T9400-90G/110P | 90/110 | 180/214 | 176/210 | 90/110 | |
T9400-110G/132P | 110/132 | 214/256 | 210/253 | 110/132 | |
★Due to space limitation, please contact us for powers above 110kw |
Item | Description | |||
Basic function | Control Mode | VF control | ||
Sensorless flux vector control(SVC) | ||||
Close-loop vector control(FVC)(Above 3.7kW) | ||||
Maximum frequency | 0~600Hz | |||
Carrier frequency | 0.5kHZ——8kHz | |||
The carrier frequency is automatically adjusted based on the load features | ||||
Input frequency resolution | Digital setting:0.01Hz | |||
Analog setting: Maximum frequency x 0.025% | ||||
Start torque | G Type:0.5Hz/150%(SVC) | |||
P Type:0.5Hz/100% | ||||
Speed range | 1:100 (SVC) | |||
Speed stability accuracy | ±0.5%(SVC) | |||
Overload capacity | G Type:60s for 150% of the rated current, 3s for 180% of the rated current. P Type:60s for 120% of the rated current, 3s for 150% of the rated current. | |||
Torque boost | Auto-boost ; | |||
Customized boost: 0.1%~30.0% | ||||
V/F Curve | Straight-line V/F curve | |||
Multi-point V/F curve | ||||
N-power V/F curve (1.2-power, 1.4-power, 1.6-power, 1.8-power, square) | ||||
V/F separation | 2 types: complete separation; half separation | |||
Ramp Mode | Straight-line ramp. | |||
Four groups of acceleration/deceleration time with the range of 0.00`6500.0s | ||||
DC braking | DC braking frequency:0.00Hz~Maximum frequency | |||
Braking time:0.0s~36.0s | ||||
Braking action current value:0.0%~100.0% | ||||
JOG control | JOG frequency range:0.00Hz~50.00Hz | |||
JOG acceleration/deceleration time: 0.0s~6500.0s. | ||||
Simple PLC,Multiple preset speeds | It implements up to 16 speeds via the simple PLC function or combination of terminal states | |||
Onboard PID | It realizes process-controlled closed loop control system easily | |||
Auto voltage regulation(AVR) | It can keep constant output voltage automatically when the mains voltage | |||
Overvoltage/overcurrent stall control | The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to over voltage/over current | |||
Rapid current limit | It helps to avoid frequent over current faults of the AC drive. | |||
Torque limit and control | It can limit the torque automatically and prevent frequent over current tripping during the running process. Torque control can be | |||
implemented in the FVC mode. | ||||
Support for multiple PG card | Support for differential input PG card, resolver PG card ,rotating transformer PG card |
ZONCN T9000 inverter picture
Q1: Are you ZONCN direct factory?
A: Yes, all the inverters are 100 new and original ZONCN.
Q2. What is your inverter's lead time and warranty?
A: We mostly produce according to each customer's order, so the lead time normally takes about 15 days. And we have 18 months warranty after delivery.
Q3. Can you add my logo on your inverter?
A: Yes, if your order quantity can meet the customization quantity.