large torque zone valve motor actuator with geared synchronous motor, 2.5 nM
Product description
Our DC electric actuator motors can be attached to IC card prepay water meter, heat meter, motorized ball valve to control the electric ball valve open or close. The zone control valve need be installed with a geared motor actuators. They are available with variations of style and suitable for different pipe diameter and torque requirement. The synchronous geared motor is an electric motor actuator in which, at steady state, the rotation of the shaft is synchronized with the frequency of the supply current; the rotation period is exactly equal to an integral number of electric cyles.
Technical data-Model K16
1. Voltage: DC3.6 V (Range: DC2.5 - 5 V, the higher the voltage, the larger torque, the shorter life span)
2. Current at idle: <25 mA @ 3.6V, 23ºC
3. Current with max loading: <1100 mA (motor #320)
4. Torque: >1.8 NM
5. Open/close time: <10S
6. Velocity reduction ratio: 2000:1 (for DN15 / DN20 ball valve)
7. Protection: IP67
Wiring definition
No | Color of wire | Definition |
1 | blue | on position signal, valve open |
2 | white | on position signal, public |
3 | yellow | on position signal, valve close |
4 | black | positive (+) |
5 | red | negative (-) |
Production overview