Conductive Foams
Laird's Ecofoam conductive foams offer an innovative approach to
traditional shielding and grounding by providing X,Y,and Z-axis conductivity,enhancing the shielding effectiveness required to meet the increasing
microprocessor speeds of today's computer,telecommunications,and otherelectronic equipment.
Via the unique patented proprietary technology,Ecofoam conductivefoams can be treated with flame retardant,and can be supplied in eithernatural or black color.
Ecofoam'conductive foams are designed for low-cycling applications suchas input/output (l/O)shielding and other non-shear standard connectors.They can be further customized to your application by die-cutting,hole-punching,notching,and so on and is especially useful for odd-shapedapplications which are difficult to shield with typical profile gaskets.

Notice of Selection

1. CF500 is the first choice of conductive foams if no flame retardant request.

2. CF700 is the first choice for flame retardant request.

3. CF100 is good in narrow width application but with higher price.

4. It would be good to keep the compression ratio of conductive foam within 20%to 50%of originalheight.

Operation Temperature

Laird's Ecofoam"conductive foams will keep in good rebound force and very little resistance changedfor years under-40°℃ to 70°C after application.Long term under high temperature environment is notrecommended.

Shelf Life and Storage Condition

12 months from date of shipment in sealed bag under 0-40°C.Suggest keep in low humidityenvironment (below 50%).

Ordering Information

LT-Shenzhen (CF600/CF700/CF800/CF100)and LT-Kunshan (CF400/CF500)are the key manufacturingsites of Conductive Foams.

Dimension Available

Laird offer several thicknesses of Ecofoam conductive foams for selection.Customized thicknessrequest between 0.5mm to 4.0mm are available (with M0Q 200sqm or equivalent).They can be furthercustomized to an application by die-cutting,lamination,or assembling with other flex or metalmaterials.